My Cart
follow us:
  Product Overview
 
 

  Teflon™ Coating Products Overview

 
Since their discovery in 1938 by DuPont chemist Roy Plunkett, Teflon™ industrial coatings have gained acceptance in a wide variety of applications. By expanding the basic technology, Teflon™ industrial coatings continue to enhance the functional qualities in today's high tech applications. Teflon™ industrial coatings are available in a full range of liquid and powder forms. The versatility of these coatings allow for almost unlimited application to a wide variety of parts and configurations – always adding value that goes far beyond the inherent nonstick coating qualities.

There are several families of fluoropolymer coatings offered.  Within each product family, there are a number of Teflon products to provide you with the best industrial coating for your particular application.  Below is a general overview of the basic fluoropolymer coating technologies available.  


 
Teflon™ PTFE Coatings
 
PTFE (polytetrafluoroethylene) nonstick coatings are two-coat (primer/topcoat) systems. These products have the highest operating temperature of any fluoropolymer (260°C/500°F), an extremely low coefficient of friction, good abrasion resistance, and good chemical resistance. Teflon™ PTFE is available only in water-based liquid form.

 

  • Teflon™ 850G-314 - PTFE Liquid Primer / One Coat (2 Part) - Green
  • Teflon™ 850G-321 - PTFE Liquid  Primer / One Coat (2 Part) - Grey
  • Teflon™ 850G-204 - PTFE Liquid  Primer / One Coat (Premixed) - Green
  • Teflon™ 851G-214 - PTFE Liquid Topcoat - Green
  • Teflon™ 851G-221 - PTFE Liquid  Topcoat - Grey
  • Teflon™ 851G-224 - PTFE High Build Liquid  Topcoat - Green 
  • Teflon™ 851G-255 - PTFE High Build Liquid Topcoat - Black
  • Teflon™ 852G-201 - PTFE Liquid Topcoat - Clear
  • Teflon™ 852G-202 - PTFE High Build Liquid Topcoat - Clear       


Registration required to purchase Teflon™ coatings and gain access to Teflon™ Fact Sheets and MSDS information.  Click Here to Sign In or Register.                           


Teflon™ FEP Coatings

FEP (fluorinated ethylene propylene copolymer) nonstick coatings melt and flow during baking to provide nonporous films. These coatings provide excellent chemical resistance. In addition to low friction, Teflon™ FEP coatings have excellent nonstick coating properties. Maximum use temperature is 204°C/400°F. Teflon™ FEP coatings are available in water-based liquid and powder forms.

 
  • Teflon™ 532G-8110 - FEP Powder Topcoat - Clear
  • Teflon™ 856G-200 - FEP Liquid Topcoat - Clear
  • Teflon™ 856G-204 - FEP Liquid Topcoat - Green


Registration required to purchase Teflon™ coatings and gain access to Teflon™ Fact Sheets and MSDS information.  Click Here to Sign In or Register.     



Teflon™ PFA Coatings


Like FEP, PFA (perfluoroalkoxy) nonstick coatings melt and flow during baking to provide nonporous films. Teflon™ PFA coatings offer the additional benefits of higher continuous use temperature (260°C/500°F), greater toughness than Teflon™ PTFE or Teflon™ FEP, and some Teflon™ PFA coatings can have film thicknesses of up to 1,000 micrometers (40 mils). This combination of properties makes Teflon™ PFA an excellent choice for a wide variety of uses, especially those involving chemical resistance. Teflon™ PFA protective coatings are available in both water-based liquid and powder forms.

 
  • Teflon™ MJ-501 - PFA High Build Powder Topcoat - Tan
  • Teflon™ 532G-5010 - PFA Powder Topcoat - Clear
  • Teflon™ 532G-5011 - PFA Fine Particle Size Powder  Topcoat - Clear 
  • Teflon™ 532G-5310 - PFA High Molecular Weight Powder  Topcoat - Clear
  • Teflon™ 532G-7000 - PFA Powder Topcoat - Sparkling Clear
  • Teflon™ 532G-7410 - PFA High Molecular Weight Powder Topcoat - Clear
  • Teflon™ 532G-13032 - PFA Reinforced Powder Topcoat - Grey
  • Teflon™ 532G-13054 - PFA Permeation Resistant Powder Topcoat - Ruby Red
  • Teflon™ 858G-210 - PFA High Build Liquid Topcoat - Clear
  • Teflon™ 858G-917 - PFA Permeation Resistant Liquid Topcoat - Ruby Red

Registration required to purchase Teflon™ coatings and gain access to Teflon™ Fact Sheets and MSDS information.  Click Here to Sign In or Register.       


TEFLON™ ETFE Coatings

ETFE is a copolymer of ethylene and tetrafluoroethylene and is also sold under the Tefzel® trademark. Although not fully fluorinated, Tefzel® ETFE has excellent chemical resistance and can operate continuously at 149°C/300°F. This resin is the toughest of the fluoropolymer coatings and can be applied at film builds up to 2,000 micrometers (80 mils) to provide a highly durable protective coating. ETFE is available in powder form.

 
  • Teflon™ 532-6118 - ETFE Permeation Resistant Powder Topcoat - Beige 
  • Teflon™ 532-6200 - ETFE Ultrasmooth Powder Topcoat - White
  • Teflon™ 532-6210 - ETFE Ultrasmooth Powder Topcoat - Clear
  • Teflon™ 532-6310 - ETFE High Build Powder Topcoat - Clear
  • Teflon™ 532-6314 - ETFE High Build Powder Topcoat - Green
  • Teflon™ 532-6405 - ETFE Powder Primer - Green
  • Teflon™ 532-6410 - ETFE Super High Build Topcoat - Clear
  • Teflon™ 699-205 - ETFE Permeation Resistant Liquid Topcoat - Pearl

Registration required to purchase Teflon™ coatings and gain access to Teflon™ Fact Sheets and MSDS information.  Click Here to Sign In or Register.       


Teflon™ One Coat Systems

These solvent-based liquid coatings are formulated with special blends of fluoropolymers and other high-performance resins to improve the toughness and abrasion resistance of these protective coatings. Because the film components stratify during baking, most of the fluoropolymer properties (such as low friction and nonstick coating characteristics) are retained. The resins provide adhesion and abrasion resistance. These Teflon™ products can sometimes be applied to smooth, clean metal. Bake requirements vary, depending on the specific coating from 325F to 600F.
 
  • Teflon™ 420G-104 - PTFE Liquid FDA One Coat - Gray
  • Teflon™ 420G-109 - PTFE Liquid  FDA One Coat - Sparkling Black
  • Teflon™ 420G-129 - PTFE Liquid FDA One Coat - Black
  • Teflon™ 532-1003 - FEP Powder One Coat - Black
  • Teflon™ 856G-114 - FEP Liquid One Coat Conductive - Green
  • Teflon™ 857G-018 - PTFE Liquid One Coat - Blue
  • Teflon™ 857G-508 - PTFE Liquid One Coat - Red
  • Teflon™ 857G-519 - PTFE Liquid One Coat - Black
  • Teflon™ 857G-575 - PTFE Liquid One Coat - Yellow
  • Teflon™ 954G-300 - FEP Liquid  One Coat - Clear
  • Teflon™ 954G-303 - FEP Liquid  One Coat - Black
  • Teflon™ 954G-304 - FEP Liquid One Coat - Green
  • Teflon™ 958G-203 - FEP Liquid One Coat - Black
  • Teflon™ 958G-303 - PTFE Liquid  One Coat - Black
  • Teflon™ 958G-313 - PTFE Reinforced Liquid One Coat - Black 
  • Teflon™ 958G-406 - PTFE Reinforced   Liquid One Coat - Black
  • Teflon™ 958G-414 - PTFE Reinforced Liquid One Coat - Green
  • Teflon™ 959G-203  - FEP Liquid One Coat - Black
  • Teflon™ 959G-204  - FEP Liquid One Coat - Green
  • Teflon™ 959G-205 - FEP LiquidOne Coat - Brown

Registration required to purchase Teflon™ coatings and gain access to Teflon™ Fact Sheets and MSDS information.  Click Here to Sign In or Register.      

 

Teflon™ Specialty Systems

These aqueous-based dispersions are specially blended multi-coat systems of Teflon™ PTFE (polytetrafluoroethylene), Teflon™ FEP (fluorinated ethylene propylene copolymer), and Teflon™ PFA (perfluoroalkoxy) to optimize performance characteristics through material synergy. Formulations are available with internal reinforcement materials in the coating matrix to increase abrasion resistance and extend service life.

 
  • Teflon™ 857G-030 - Liquid Primer - Black
  • Teflon™ 857G-230 - Liquid Topcoat - Black
  • Teflon™ 855G-021 - Liquid Primer - Blue
  • Teflon™ 857G-130 - Liquid Midcoat - Pewter
  • Teflon™ 857G-135 - Liquid Midcoat - Black
  • Teflon™ 857G -240 - Liquid Topcoat - Clear
  • Teflon™ 857G-040 - Liquid Primer - Black
  • Teflon™ 857G-140 - Liquid Primer - Black
  • Teflon™ 857G-240 - Liquid Topcoat - Clear
  • Teflon™ 953G-401 - FEP Liquid Topcoat - Clear
  • Teflon™ 953G-506 - FEP Liquid Primer - Violet

Registration required to purchase Teflon™ coatings and gain access to Teflon™ Fact Sheets and MSDS information.  Click Here to Sign In or Register.     


 

Teflon™ Primers

Teflon™ primers are an effective way to prepare a surface before the coating is applied. Primers ensure proper adhesion, increase durability, and give additional protection to the substrate. With the use of our primers, the coating is given a smooth surface to bind to, which creates a more protective layer. This additional layer decreases porosity of the coating to the substrate.  

 
Primer FDA Carrier PTFE PFA FEP ETFE
Teflon™ 420G-703 - Black Yes Solvent    
Teflon™ 420G-717 - Red Yes Solvent    
Teflon™ 857G-030 - Black Yes Water  
Teflon™ 855G-021 - Blue Yes Water  
Teflon™ 857G-040 - Black Yes Water  
Teflon™ 699N-129 - Black Yes Water      
Teflon™ 850G-314 - Green No Water/Acid  
Teflon™ 850G-321 - Gray No Water/Acid  
Teflon™ 850G-204 - Green No Water/Acid  
Teflon™ 857G-100 - Black Yes Water  
Teflon™ 959G-203 - Black Yes Solvent    
Teflon™ 959G-204 - Green No Solvent    
Teflon™ 959G-205 - Brown Yes Solvent    
Teflon™ 532G-42551 - Black Yes Powder    
Teflon™ 532-6405 - Green No Powder      

 
Registration required to purchase Teflon™ coatings and gain access to Teflon™ Fact Sheets and MSDS information.  Click Here to Sign In or Register.    
                 
 
 
]
 
 
 
 
 
 
The Chemours Company and Teflon™ brand logos are trademarks of The Chemours Company FC, LLC and used under license by Intech Services, Inc.
©Copyright 2017 Intech Services. All Rights Reserved